Loading...

Ultimate HyperTracks!

Our RDX system has already proven itself to the most demanding users, and is one of the best technologies we now offer!
With an exceptional vehicle, we offer an exceptional, revolutionary tracked wheel!



more about RDX
The RDX perfectly combines the speed, power, safety, and mechanical preservation of your vehicle.
Its sprocket of 26 teeth in full traction provides optimal propulsion by continuous engagement.

Beyond the preservation of performance and original speed, our engineers have developed a customized system for UTVs that offer powers greater than 150 HP.

The RDX system is a unique design, totally innovative, and entirely dedicated to those looking for the ultimate! RDX is developed in a dedicated area, and we use the same processes as those used in Formula 1.

That's why RDX only installs on a specific vehicle, and it is one of the only systems that can be installed on the most aggressive UTVs on the market!

Lastly, the RDX is the model that has rocked us into the rigorous world of HyperTracks.

Customized design

The installation of a track system on a turbo-type vehicle is a very complex technical exercise. Tensile load and propulsive forces become exponential, and nothing can be exploited without careful thinking and testing. With vehicle safety and integrity as our key development criteria, RDX is a custom design with applied engineering that is very advanced.

Formula 1 in the snow

We are redefining the concept of speed by fast motor skills in snow and terrain conditions for which the vehicle was not designed. And we're pushing these limits once again, by offering more extensive use of the vehicle.
RDX, with its own engineering and development team, is the spearhead of our technology!


Specifications

Contact path: 2 402 po2

Front Track

Total Length
98.5" - 250 cm
Total Width
12.5" - 31.75 cm
Lug height
1" - 2.54 cm
Weight
99 lbs - 44 kg

Rear Track

Total Length
116.7" - 297 cm
Total Width
13.5" - 34 cm
Lug height
1" - 2.54 cm
Weight
119 lbs - 54 kg

Features

FULL TRACTION

We are the only ones in the world to harness full traction technology. We've replaced the original wheel with a sprocket of 26 teeth, on which we added a tracked wheel. So we leave the traditional world of track systems to address that of the tracked wheel!
Reserved for medium and big engine, our concept retains the wheel advantages by bringing better (and more) reach to the ground.
Note that an off-road vehicle on tracks has not been studied. With a tracked wheel, we respect the mechanical bases for which your vehicle was designed!

ZERO GRAVITY

With the tracked wheel, forget the fundamentals of raising the vehicle from 4 to 6 inches!
Our system ensures full traction with optimal propulsion, and your vehicle retains its original height (almost), which reduces the risk of potential breakage.
Your center of gravity remains unchanged, and your crossing abilities are even improved!
By maintaining a "zero" center of gravity, the stability of the vehicle and the safety of the pilot and passengers is respected.
Full traction provides full propulsion, with speed and driving balance never achieved before!

NO MECHANICAL TENSION

When rolling, a traditional track system constantly seeks to rotate. Therefore, it is necessary to install anti-rotations, which exert a constant tension to avoid this fatal movement. This retention exerts a continuous force on the mechanics of the vehicle.
Using the principle of the tracked wheel, our system rolls without performing this continuous rotation. Our anti-rotation system, which we call limit switches, act only when facing obstacles. If these happen to break, you can continue to roll!

ENGINE RPM

When driving a vehicle, why use a full revolution to drive slower?
Once again, the tracked wheel restores and respects the mechanical rules of the manufacturer, while maintaining the original engine speed.
This considerable advantage, which is provided by full traction, makes it possible to exploit all of the horsepower, at their best performance, with an engine that will not be overused.
So your driving comfort is preserved again.

SYSTEM PROTECTION

The tracked wheel propels on full traction. This traction, unique in the world, prevents the wheel from coming out of its axis.
The sprocket keeps the track inside its pitch, and it's impossible for it to slip or move. Attached from top to bottom (continuous engagement of 13 studs/26) with lateral support for all wheels, our system allows complete protection from all elements.
The stringers also protect the wheels against impacts and projections.

ROBUST STRUCTURE

The chassis and all the elements of our tracked wheel are made of steel.
This strength is reinforced by a military grade that guarantees a very high-end weight/resistance!
The shafts are treated with gas nitridation, which promotes high resistance to wear, friction, abrasion, and binding.
The secondary wheels are made of UHMWPE (ultra-high molecular weight (or density) polyethylene). With a high capacity for compression and resistance to abrasion, they have a very long life!

BEARINGS

All of our bearings can be greased manually.
They also have extreme resistance to radial and axial forces.
It's one of our strengths that once again highlights our difference in the market!
The central double-tapered bearing is waterproof, which prevents the entry of dusty or corrosive materials and ensures an optimal lifetime!

INTEGRATED SCRAPPERS

Ice is the primary enemy that harms the rubber track and the wheel and sprocket traction.
That's why we have scrapers that are placed on each of our wheels and the sprocket.
They will, therefore, prevent ice build-up and ensure that the system functions perfectly while extending its life.



compatibility

can-am
X3 (MAX) TURBO
X3 (MAX) TURBO R
X3 (MAX) X DS TURBO R
X3 (MAX) X RS TURBO R
X3 (MAX) RC TURBO
X3 (MAX) RC TURBO R
X3 XMR TURBO
X3 XMR TURBO R
polaris
RZR XP TURBO
RZR XP TURBO DYNAMIX EDITION
RZR XP 4 TURBO DYNAMIX EDITION
RZR XP TURBO S
Textron off-road
WILDCAT XX
Yamaha
YXZ 1000R

Question about UTV RDX?

USA/CANADA
+1 819 362-7742
Europe
+33 7 56 85 10 21
All the fields are required
Please trust us, we will never send you spam